Chipmunk Crusher, 2hp, 220/440, 3ph 50/60hz

Crusher utilizes unique moveable jaw principle. The upper end of the jaw travels in a circular path driven by the eccentric shaft. The lower end oscillates through a short arc described by the toggle. The resultant jaw action is a forward and downward motion relative to the stationary jaw that crushes the sample and forces its discharge.

The discharge opening between jaw can be adjusted to control crushed particle size by turning a hand wheel on the side of the crusher. The adjusting mechanism consists of wedge blocks operated by a screw. The blocks transmit crushing force from the jaw to the frame relieving all strain on the adjusting screw itself.

Heavy bronze bearings are sealed against dust and dirt and are lubricated by grease cups, so no special greasing tools are required. Bearings may be taken up for wear, reversed on the shaft for more wear, and after long service, easily replaced.

Easy to clean--the stationary jaw is easily lifted out of the frame to completely expose the inner parts for thorough brushing. Dropping the cam-lock handle anchors the jaw securely in position.

Jaw Capacity: 2 1/4 x 3 inches

Drive Type: V-Belt Driven

RPM: 400

Capacity: 400 lbs. per hour